CVT Drive Belt 654 18 30 for Scooter ZX50 DIO-AF34 DIO-AF35

Description

DRIVE BELT 654-18-30
The outer circumference of this item measured by a flexible tape is approx. 662mm (26.06 inch)
(The first number 654 does not represent the outer circumference of this drive belt is exact 654mm.)
The second number 18 is nominal width.The actual width is approx. 17.7mm to 18mm if measured by vernier caliper ( it is not accurate due to manual measurement.)
The third number 30 means tooth angle is 30 degree.
A top quality reinforced drive belt produced by the belt factory produced for Qianjiang/Keeway, Jonway, Znen, Jinlang and more big motorcycle manufacturers.
Application: Honda DIO-AF34, DIO-AF35 , or AF17/AF18/AF28 rebuilt with 118mm clutch torque driver.
Reminder: please check the mark on your old drive belt before purchase. If the size of your old drive belt is 641-15.5-30, our this drive belt does NOT fit.
Important Notes
:
1.
Import duties, taxes & other charges (such as Surcharges for Out-of-Delivery Area/Remote Area), if any, are not included in our item price or shipping cost. These charges are Buyer's responsibilities.
2
. You may be required by local shipping carrier to submit document or payment certificate for customs clearance.
3
. All products are brand new in good condition, and all items are inspected before shipment. All products are packed properly. Item may arrive damaged due to rough handling in transit, so it is strongly suggested to always have open-box inspection in front of postman before signing for receipt and reject parcel if items inside are damaged.
4. This item should be installed by a professional mechanic.
5
. If you are satisfied with our products and our service, please leave positive feedback.
Please do not open a dispute case rashly without prior communication with us. Most disputes can be solved by friendly negotiation.